Annonces

Note that you do not need to upgrade OS agent with every XorMon server upgrade.
Check here if you need any fix or new feature.

It is a replacement for LPAR2RRD agent.
It has same functionality as LPAR2RRD agent, it will be enhanced a lot in the future.

  • 1.0.3
    • CLI installation accepts more XorMon server targets
    • Debian Linux: LVM topology fix
  • 1.0.0
    • Initial release which works with XorMon server 2.3.0+
  • 1.1.9
    • Implemented disk multipath info
  • 1.1.8
    • Agent crashed when there was a big move memory in a memory pool, fixed
  • 1.1.7a
    • Previous version does not work after 1.1.2022
  • 8.50-0
    • IBM Power Systems: VIO server: network interfaces might not provide stats (depends on a VIO version), fixed
    • Linux: fix for LVM topology for Debian
    • Open ZFS: fix for gaps in the collected data
    • Fix for agent sending to more targets with using ports (it did not send data to all defined ones)
  • 8.40-5
    • Linux: added another severity leve for dmesg reporting (emerg)
    • Linux: change of getting disk volume IDs for topology mapping purposes, the new method is more reliable and faster
    • AIX: aixerrpt.conf-template enhanced about ignoring these useless RMC messages F1716755, B5C7DB72
  • 8.40-2
    • Linux Open ZFS: more robust collecting large-scale data
    • Linux: it shows 100% swap usage even when there is no swap defined at all, fixed
  • 8.40-0
    • AIX: NVME over FC support
    • AIX: FC and Eth statistic support for VIO server 4.1.1.10+
    • Linux: added Pressure CPU, IO and Memory
    • Linux on Power: wrongly reported number of configured CPUs, fixed
  • 8.30-4
    • Solaris: run time optimization for environments with many disks and zones on a host
  • 8.30-2
    • Linux: a fix for machines which have no swap space defined, the agent crashed before the fix
    • JOB TOP: TOP 50 processes are sent now (before TOP 20)
  • 8.30-1
    • Solaris: A fix for network interfaces with ":" in their name
  • 8.30-0
    • Linux: OpenZFS: it collects ZFS performance and configuration data
    • Filesystem utilization is sent more frequently (every 20 minutes instead once an hour like before)
    • JOB: sometimes process names were not presented in the UI, fixed
    • AIX: fixed a bug related to old perl (5.8) since the agent v8.12
  • 8.20-0
    • AIX: added lpar2rrd-AIX-wrapper.sh wrapper to avoid Dynatrace One agent issue
    • Linux: OS info is added
  • 8.10-10
    • Linux: NFS client stats have been added (based on nfsiostat)
    • Linux: LVM configuration and topology has been added
    • Possibility to set its own DF binary 
              * * * * * DF=/usr/local/bin/df /usr/bin/perl /opt/lpar2rrd-agent/lpar2rrd-agent.pl  > /var/tmp/lpar2rrd-agent.out 2>&1
  • 8.10-7
    • AIX: Huawei volume id proper detection
    • Hostname was saved just for AIX, fixed i pro x86
  • 8.10-6
    • Solaris: cpu_sys a cpu_usr was swapped, fixed
  • 8.10-4
    • AIX LVM: discovery is ruynning once 6.5 hour instead of every minute
  • 8.10-2
    • AIX: LVM: unmounted filesystems are skipped
    • AIX LVM: Concurrent VG were skipped, fixed
  • 8.00-7
    • Agent sends data after 10minutes instead of 20 minutes plus random time (0 - 9 minutes)
  • 8.00-5
    • AIX: errpt log is send
  • 8.00-2
    • AIX: getting Hitachi storage volume id
    • bulk data transfers (all data lines in single chunk)
  • 7.91-7
    • Linux: port WWWN is sending now
  • 7.91-1
    • Linux: skipping disk capacity for /dev/loop*
  • 7.90-1
    • AIX: fixed a bug from previou version where did not FC adapter throughput
  • 7.90-0
    • Monitoring of AIX FC adapter errors
  • 7.60-14
    • Monitoring of AIX Eth adapter errors
  • 7.60-5
    • Excluded Perl dependency on File::Copy which might not exsist on Fedora or RHEL
    • RHEL9: lscpu has different syntax, CPU MHz is not in std output, must be used "lscpu -e=MHZ" separatelly, without that does not work CPU core graphs
    • AIX: trasfered is even hdisk size
  • 7.60-1
    • AIX FC errors in graphs (FC physical adapters only)
    • Linux: SAN data: support for more FC drivers types when some do not provide counters we use but provide other counters
    • Linux: CPU model is send and saved on the server side
    • Suport of Solaris 8 (memory usage works now however without FS cache)
  • 7.50-1
    • Linux: support for multipath health status alerting
    • AIX / Linux: fixes for getting volume ID of disks
    • Solaris: SARMON enhanced about IOPS, MB/sec and latency
  • 7.40-1
    • Solaris sarmon CPU queue implemented
    • Linux: added CPU stolen metric
  • 7.30-1
    • Linux: added CPU core and GHz utilisation graphs for Linux (x86 only)
    • Linux Total: fixed data when there was more adapters
    • AIX: wrong identification of iSCSI disks in mutlitaph checking
  • 7.20-1
    • Linux fix: the agent loses VM UUID (/opt/lpar2rrd-agent/.uuid) after agent upgrade
    • Solaris10: fixed an issue with zone in the command prstat (agent not sending data)
  • 7.20-0
    • Linux: new total IOPS, Data and Latency graphs
    • Linux multipath: using sudo for "multipath" command (only root can run it)
  • 7.00-4
    • AIX: SAN: fcstat is parsing correctly even if there is NVMe stats
    • AIX: fixed SMT number recognization
    • Solaris10: fix for: swap -lk
  • 7.00-1
    • Linux: fix in send of volume_id, not all disks were selected
  • 7.00-0
  • 6.15-2
    • AIX VIOS: unused LAN adapters might produce "SEA LOOP" error log entries, fixed
    • AIX rpm install error fixed "Error in PREUN scriptlet in rpm package lpar2rrd-agent-6.XX..."
    • Solaris CPU queue stats : number of virtual CPUs was wrong
  • 6.15-0
    • AIX/Linux/Solaris: support of CPU queue statistics
  • 6.11-2
    • Solaris: support for new menu structures in the UI
  • 6.10-0
    • Solaris: support of Pools
    • NMON: support of Linux on Power
    • Linux: shmmem fix
  • 6.01-0
    • AIX: fix for filesystem utilization, it has not been reported when NFS filesystems was there
    • Linux: fix for filesystem utilization, problem with long filesystem names
  • 6.00-0
    • AIX WLM (Workload Manager) monitoring
    • Monitoring and alerting for filesystem space utilization
  • 5.05-7
    • AIX pinned memory did not count large pages (an issue since "vmstat -v" implementation for mem data in 4.95-7)
  • 5.05-6
    • AIX WPAR memory was fixed (an issue since "vmstat -v" implementation for mem data in 4.95-7)
  • 5.05-5
    • Linux memory: buffers memory has been added to cached (FS cache)
  • 5.05-2
    • VMware support for RHEL 5.x where UUID is not accessible from /proc
  • 5.05-0
    • VMware support, OS agents running o VM's are mapped directly to VM's in VMware menu tree
    • JOB TOP, CPU and Memory tracking of running processes graphically in the time
  • 5.00-4
    • AIX: skipping fcs interfaces which has scsi_id=0x0 (lsattr -El), it might lead to hanging of fcstat and entstat cmds
  • 5.00
    • Renamed 4.96
  • 4.96
    • Linux: LAN write throughput was wrong, there was the same value as for read
    • AIX: added support for native SCSI adapters : sisioa0
  • 4.95-7
    • Linux: switched to use `cat /proc/meminfo` instead of `free` for memory stats
    • AIX: memory stats switched to use "vmstat -v" instead of "svmon -G" as before
      (svmon counts FS cache in different way)
    • AIX LAN enhanced about packet count in/out
      It is presented in the UI under LAN tab (below usual MB/sec graphs, LPAR2RRD server v4.95-6+)
  • 4.95-4
    • Solaris: fixed a few issues with memory reporting on Sparc HW
    • WPAR: avoids cmds which are not working in WPAR env and just reports errors in the log
  • 4.95-0
    • Solaris support
  • 4.90-0
    • Network statistic ported on CentOS7 & Red Hat 7 (new "ifconfig -a" format)
  • 4.84-3
    • Randomization of agent connecting to the LPAR2RRD could lead to long times, introduced max time (20 mins) for pushing data
  • 4.84-2
    • HMC agent could stop working under some condition since 4.81 agent version, fixed
  • 4.84-1
    • Fixed memory graphs for some Linux X86 like CentOS 6 which had wrong data (negative). Most of Linux X86 have not been affected
  • 4.84-0
    • Linux x86 support
  • 4.81-1
    • 4.80 and 4.81 reported FCS only if there was any disk locally attached what NPIV and tape dedicated FSC are not
  • 4.81
    • OS agent contacts the daemon randomly after 5 minutes to more spread connecting of the daemon in the time
  • 4.80
    • vSCSI adapters support
    • response times support for all vSCSI and FCS adapters are monitored (requires LPAR2RRd server 4.74+)
    • SMT info from LPARs is passed to the server to support SMT based CPU Workload Estimations
    • as prevetion against hanging external shell commands executed from the agent there is limited number of copies every particular external cmd running concurently in the system
    • SEA fix (it did not sent SEA data for some NMON versions which use a bit different key word in the nmon file)
    • introduced variable which preferes hostname before the lpar name in data send to the daemon (usefull for NMON loads from unmanaged full lpar partitions where is not posible to change lpar name)
      LPAR2RRD_HOSTNAME_PREFER=1 /usr/bin/perl /opt/lpar2rrd-agent/lpar2rrd-agent.pl -n /home/nmon_dir <LPAR2RRD server>
  • 4.70
    • fixed a paging issue on AIX where paging of 64kB pages was considered as standard 4kB pages
      (real paging was higher than displayed one)
    • many of small other fixes, upgrade to 4.70 if possible.
  • 4.60
    • it is implemented support for integrated NMON online grapher (aka nmon.lpar2rrd.com) in you local instance
    • couple of small other fixes, you might keep to use 4.50 if it is working fine.
  • 4.50
    • NMON data support
      • It is able to use already generated NMON data as a source (online and batch mode processing is possible) instead of using agent called commands to get statistical data.
      • It might use NMON data and its own data as the source concurrently.
      • It is able to process collected NMON data from many LPARs in one location as a batch job once a day.
    • WPAR support
    • It posibble to feed via one OS agent more LPAR2RRD server concurently
  • 4.07
    • fixes FCS problems (it avoids non connected fcs adapters which causing problems like long term query and errpt warnings)
  • 4.06
    • it uses internal timestamp to save time of last saved data on the server side, then it sends newer data only
  • 4.05
    • limit of concurrently running OS agents to 10 on single OS (to do not exhaust max number of running processes if anything stuck)
    • possibility to exclude fcstat (SAN stats), the cmd might cause problems
      crontab line: 
      * * * * * FCSTAT=/bin/true; export FCSTAT; /usr/bin/perl /opt/lpar2rrd-agent/lpar2rrd-agent.pl >LPAR2RRD-SERVER<   >PORT< > /var/tmp/lpar2rrd-agent.out 2>&1
  • 4.04
    • fix for LPARs (servers) not managed by the HMC, it has not worked before correctly
  • 4.03
    • fix for AME support, it did not work in 4.00, it is necessary to upgrade even LPAR server to 4.03 release at least
    • fix for memory usage data if AMS is being used
  • 4.00
    • New communication protocol (requires 4.00+ LPAR2RRD server)
    • Data collection enhanced about LAN (eth), SAN (fcs), SEA (VIOS only), paging allocated, AME
  • 1.02
    • initial release which supports memory and paging data only
  • 8.0.1
    • Enhanced error handling during installation
  • 8.0.0
    • Just renamed to be released with XorMon
  • 7.7.3
    • fixed Hyper-V cluster identification: fix omitted line for class Win32_OperatingSystem, which prevented to recognize hyperv cluster
  • 7.7.1
    • The agent automatically select Get-ciminstance if available, if does not then it switches to Get-wmiobject
  • 7.7.0
    • ERROR identification in French language fixed
  • 7.6.1
    • Agent using new PowerShell cmd "Get-ciminstance" instead of original "Get-wmiobject" which is much faster
  • 7.5.1
    • Support Windows VMM management to get VM list
  • 7.4.1
    • Paging monitoring has been implemented
  • 7.3.7
    • Longer jobs timeout, for hundreds of monitored servers needed
    • Optimization: skip virtualization cmds when no virtualization is on that server
  • 7.3.6
    • Output redirection reflecting PS version < 3
  • 7.3.4
    • Fixed a bug during update when is overwriten cfg file
  • 7.3.3
    • Sending data files to the LPAR2RRD server is realised by separated background started process
  • 7.3.2
    • Windows/Hyper-V process monitoring implementation
  • 7.3.1
    • Windows/Hyper-V CPU queue and number of running processes and threads
  • 7.3.0
    • Microsoft S2D support
  • 7.0.2
    • Removed bug when refused connection by daemon, then win agent finished (not collect data
    • Added "uptime"
  • 1.3.9
    • CPU data from some specifix win host was wrong, fixed, had to be used other counters
  • 1.3.8
    • Data from agents is sent 15/20/25 minutes, before it was every 5 minutes
  • 1.3.7
    • Fixed copying files to different disk
  • 1.2.0
    • Initial verze

Liste des annonces

Utilisez ce formulaire pour vous inscrire aux nouvelles annonces XorMon ainsi qu’aux e-mails de mise à niveau et de service.

Indiquez votre adresse e-mail.
Confidentialité